View RFQ CartMy Account / RFQ Submission StatusHelp



Join our mailing list!

(Your shopping cart is empty)
You are here: Home > Dehydrators
Choose a sub category:
Dehydrators Accessories
Sort By:
Page of 3
Andrew® 6600D Series Gas Distribution Manifolds<br><i>0 to 15 psig (0 to 103 kPa) pressure gauges</i>
Andrew® 6600D Series Gas Distribution Manifolds
0 to 15 psig (0 to 103 kPa) pressure gauges

Configure model in RFQ cart

The 6600D series manifolds are gas distribution systems that provide up to six pressure outlets from a
single pressure inlet. Manifolds allow you to pressurize multiple transmission lines using one dehydrator. The units are equipped with a needle valve and pressure gauge at each outlet for individual line pressure readings. A gas inlet valve is provided for system test purposes. Type 6600D has 0 to 15 psig (0 to 103 kPa) pressure gauges; Type L6600D (Our ANDW-L600D) has 0 to 5 psig (0 to 35 kPa) pressure gauges.
more info
Andrew L6600D Series Gas Distribution Manifolds<br><i>0 to 5 psig (0 to 35 kPa) pressure gauges</i>
Andrew L6600D Series Gas Distribution Manifolds
0 to 5 psig (0 to 35 kPa) pressure gauges

Configure model in RFQ cart

The 6600D series manifolds are gas distribution systems that provide up to six pressure outlets from a
single pressure inlet. Manifolds allow you to pressurize multiple transmission lines using one dehydrator. The units are equipped with a needle valve and pressure gauge at each outlet for individual line pressure readings. A gas inlet valve is provided for system test purposes. Type 6600D (Our ANDW-6600D) has 0 to 15 psig (0 to 103 kPa) pressure gauges; Type L6600D has 0 to 5 psig (0 to 35 kPa) pressure gauges.
more info
ETI's ADH NETCOM Automatic Air Dehydrator with Ethernet Communications<br>
ETI's ADH NETCOM Automatic Air Dehydrator with Ethernet Communications

Configure in RFQ Cart

The ADH NETCOM automatic dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. Output pressure is field configurable between 0.10 psig and 7.50 psig (7mbar - 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet network more info
ETI's ADH NETCOM Outdoor NEMA<br>Automatic Air Dehydrator with Ethernet Communications<br><i>Replaces ADH-2ACOM and ADH-3COM NEMA</i>
ETI's ADH NETCOM Outdoor NEMA
Automatic Air Dehydrator with Ethernet Communications
Replaces ADH-2ACOM and ADH-3COM NEMA

Configure in RFQ Cart

The ADH NETCOM automatic dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. Output pressure is field configurable between 0.10 psig and 7.50 psig (7mbar - 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet networks more info
ETI's ASM-1<br>Smart Manifold <br>
ETI's ASM-1
Smart Manifold

Configure in RFQ Cart

The ASM–1 Smart Manifold automated air manifold distributes low pressure dry air from one or more sources to one or more transmission lines. Output pressure is configurable between 0.10 psig and 7.50 psig (7mbar – 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet network. more info
ETI's RCD Low Cost Passive & Passive Self-Pumping Dehydrators
ETI's RCD Low Cost Passive & Passive Self-Pumping Dehydrators

Although it contains just one moving part, the Patented RCD-2 Passive Dehydrator dries waveguide and coax in fixed, mobile and solar powered systems with volumes up to one cubic foot. It eliminates the need to operate pressurization equipment from emergency power when used as a backup for mechanical systems. The RCD-2 may also be used to protect equipment from moisture damage during transit and unheated storage. more info
ETI Tubing 18208 Black Polyethylene UV resistant semi-rigid<br>Priced per foot for lengths over 250-feet only!
ETI Tubing 18208 Black Polyethylene UV resistant semi-rigid
Priced per foot for lengths over 250-feet only!
Price: $0.76
Preliminary RFQ Price: $0.68
LIMITED TIME PROMOTION!
Must exceed 250-feet!
You save $0.08!

Black Polyethylene UV resistant semi-rigid tubing.  ID= 1/4" and OD = 3/8" more info
ETI Tubing 16298 Plastic Fitting<br>T male 1/4 inch (3) barbed connector
ETI Tubing 16298 Plastic Fitting
T male 1/4 inch (3) barbed connector
Price: $3.99

T male 1/4 inch (3) barbed connector.  ID= 1/8 and OD = 1/4 more info
ETI Tubing 14583 Plastic Fitting<br>Elbow 1/8 inch NPT to 1/4 hose barb
ETI Tubing 14583 Plastic Fitting
Elbow 1/8 inch NPT to 1/4 hose barb
Price: $3.99

Elbow 1/8 inch NPT to 1/4 hose barb.  OD = 1/4 more info
ETI Brass Fitting 18208 Hose Barb 1/4" to 1/8" NPT male, straight
ETI Brass Fitting 18208 Hose Barb 1/4" to 1/8" NPT male, straight
Price: $6.00
Preliminary RFQ Price: $5.89
You save $0.11!

Brass Fitting 18208 Hose Barb 1/4" to 1/8" NPT male, straight more info
   
 
Vincor, Ltd.
5652 W. Monee-Manhattan Road
Monee, IL 60449  U.S.A.
 About Us
 Our World Experience Map
 Privacy Policy
 Send Us Feedback