View RFQ CartMy Account / RFQ Submission StatusHelp



Join our mailing list!

(Your shopping cart is empty)
You are here: Home > Mounts/Support Sys > Baird Non-Penetrating
For the original online ballast calculation, and fast - free quotations for ALL mount solutions, visit:
The Roof Mounts .tel Directory
Sort By:
Page of 1
Baird B4-6x6 (6 ft X6 ft non-pen roof mount designed for a 4�(1.2m) antenna)

Call For Pricing

Baird B4-6x6 is a 6’X6’ non-pen roof mount designed for a 4’(1.2m) antenna. Mast diameters up to 3.5”OD and typical mast height of 3’ max. for most installations. The mount is also available with a 6’x8.6’ foot print, model B4-6x8.6.
Baird PSH-2 Non-pen roof mount designed for a 3 ft (1m) antenna

Call For Pricing

Non-pen roof mount designed for a 3’(1m) antenna. The mount utilizes a post-tension concept to provide a strong, cost-effective mount. Mast diameters up to 3.5”OD and mast height 2’ max. for most installations.
Baird PXL-2HD Heavy duty version of the PXL-2 non-pen mount designed to handle the 12.5 ft (3.8m) antennas

Call For Pricing

The PXL-2 H.D. is a heavy duty version of our standard PXL-2 non-penetrating mount. The mount and mast shown below is designed and tested to handle the 3.8M antenna.  Larger antennas may be used with the PXL-2 H.D. however, each installation must be examined to determine if the mount can withstand the wind loads which may be applied.
Baird BPTS-6 Non-pen roof mount designed for a 6 ft (1.8m) antenna

Call For Pricing

A non-pen roof mount designed for a 6’ (1.8m) antenna. The mount utilizes a post-tension concept and can hold from two to twelve 8”x8”x16” per leg.Mast diameters up to 6.62”OD and typical mast height of 3’ max. for most installations. A larger version the BPTS-6D is also available.
Baird AFC-EHD Extra heavy duty mount designed to handle 5m antennas

Call For Pricing

The AFC EHD is designed to handle up to and including a 5.0M antenna. Larger antennas may be used, but each installation must be reviewed by Baird to determine if the mount can withstand the loads.
The mount is available in four footprints ranging rom 20' x 20' (shown) to 28' x 28' to spread the ballast load over a greater area. The AFC EHD must be used in conjunction with an adapter kit (not pictured) which allows the antenna support structure to attach to the AFC EHD base.  The maximum length of any part of the AFC HD is 10' to allow for easier shipping and handling.
Baird AFC-HD Extra heavy duty mount designed to handle 4.5m antennas

The AFC HD is designed to handle up to and including a 4.5M antenna. Larger antennas may be used, but each installation must be reviewed by Baird to determine if the mount can withstand the loads.
The mount is available in four footprints ranging rom 16' x 16' (shown) to 24' x 24' to spread the ballast load over a greater area. The AFC HD must be used in conjunction with an adapter kit (not pictured) which allows the antenna support structure to attach to the AFC HD base.  The maximum length of any part of the AFC HD is 8' to allow for easier shipping and handling.
Baird B6-18 Non-pen roof mount designed for an 18 inch DSS antenna
Price: $59.00

Baird B6-18 Non-pen roof mount designed for an 18” DSS antenna
Baird B6-30 Non-pen roof mount designed for a 30 inch DSS antenna.
Price: $83.00


Baird B6-18 Ridgemount designed for 18 inch DSS antenna
Price: $87.00

The B6-18RM is a non-penetrating, ridgemount designed to handle an 18" DBS/*DSS antenna. The non-penetrating mount allows the antenna to be supported on the roof without bolting the mount to the roof, thus eliminating the possibility of creating a roof leak. Also the non-penetrating mount allows for easy removal when a customer relocates or no longer needs the service.
   
 
Vincor, Ltd.
5652 W. Monee-Manhattan Road
Monee, IL 60449  U.S.A.
 About Us
 Our World Experience Map
 Privacy Policy
 Send Us Feedback